MLCS 22-1/2 Degree Lock Miter Bit Set

MLCS 22-1/2 Degree Lock Miter Bit Set Reviews

Other Picture

MLCS 22-1/2 Degree Lock Miter Bit Set Feature

• Make a Strong, Perfectly Matching Joint.
• Quality, Carbide-tipped MLCS Router Bits
• Easy set-up.
• Perfect for Octagonal Edges on Corner Cabinets
• FREE Shipping in the Contiguous USA

2 flute, carbide tipped 1/2" shank set. The 2 bit system joins material at 45º by cutting a 22-1/2º miter. Makes a perfect matching, strong tongue and groove joint. Easy set-up. Use for octagonal shapes on corner cabinet, entertainment centers, etc. For 1/2" to 15/16" stock.

Visit Store Now !!

Detail Products

Detail Reviews

1/2'' BeadLOCK Tenon Bit

1/2'' BeadLOCK Tenon Bit Reviews

Other Picture

1/2'' BeadLOCK Tenon Bit Feature

• 1/2'' shank
• Approximately 3-3/8'' long
• Carbide length: about 1-5/8''
• Ultra-fine grade K20 tungsten carbide

Save money by making your own Beadlock loose tenon stock; just raid your scrap bin for material. Featuring precision-machined carbide flutes, this bit trims stock to 1/2" widths for a perfect match to your 1/2" Beadlock mortise. Its sturdy 1/2" shank ensures minimal vibration. You can stock up by running long lengths and cutting off tenons as needed, or you can just run a few short pieces for a small project. With Beadlock Router Bits, the choice is yours!

These router bits are manufactured using the finest grade K20 tungsten carbide, and are silver brass welded for the strongest possible bond. We use a 600 grit diamond sharpening wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. If for any reason you are not satisfied with the quality of the bit, return it with proof of purchase for a full refund or replacement.

Visit Store Now !!

Detail Products

Detail Reviews

4-Pc. 8mm Dovetail Router Bit Upgrade Kit

4-Pc. 8mm Dovetail Router Bit Upgrade Kit Reviews

Other Picture

These 8mm shank dovetail router bits are 25% larger than 1/4" bits and reduce chatter. Includes 1/2" x 14 degree and 8 degree dovetail bits, 5/16" straight bit, and 1/2" to 8mm collet adapter. Fits all existing Rockler dovetail jigs.

Visit Store Now !!

Detail Products

Detail Reviews

CMT 855.601.11 Finger Pull Bit 1/2-Inch Shank, 1-7/8-Inch Overall Diameter, 1-1/8-Inch Cutting Length

CMT 855.601.11 Finger Pull Bit 1/2-Inch Shank, 1-7/8-Inch Overall Diameter, 1-1/8-Inch Cutting Length Reviews

Other Picture

Why interrupt the subtle linearity of an all wood drawer front or cabinet door with a metal knob or handle? Use a CMT Finger Pull Bit to make a harmonious wooden handle. Choose your preference - a template profile directly in the wood or a European style hardwood pull as illustrated below. With careful preparation, execution, and choice of material, you can produce beautiful drawers and doors at a reasonable cost.

Visit Store Now !!

Detail Products

Detail Reviews

Amana Tool 53410 Slotting Cutter Assembly 1-7/8-Inch Diameter by 1/4-Inch Cutting Height by 3-Wing 1/4-Inch Shank, Carbide Tipped

Amana Tool 53410 Slotting Cutter Assembly 1-7/8-Inch Diameter by 1/4-Inch Cutting Height by 3-Wing 1/4-Inch Shank, Carbide Tipped Reviews

Other Picture

Amana Tool 53410 Slotting Cutter Assembly 1-7/8-Inch Diameter by 1/4-Inch Cutting Height by 3-Wing 1/4-Inch Shank, Carbide Tipped Feature

• 1-7/8-inch cutting diameter
• 1/4-inch cutting height
• 2-3/8-inch length
• 1/4-inch shank, 3-wing
• Carbide tipped, industrial quality

Deep Mortise & Long Tenon Cabinet Doors

Visit Store Now !!

Detail Products

Detail Reviews

CMT 852.502.11 Dado & Planer Router Bit 1/2-Inch Shank, 1-Inch Cutting Diameter, 3/8-Inch Cutting Length

CMT 852.502.11 Dado & Planer Router Bit 1/2-Inch Shank, 1-Inch Cutting Diameter, 3/8-Inch Cutting Length Reviews

Other Picture

CMT Dado & Planer bits were designed exclusively for cleaning dadoes and finishing rough stock. They are also capable of stripping paint and varnish quickly and efficiently. Available with bearing guide for standard pattern work. Item numbers ending with 'B' indicate series 852 bits with bearings.

Visit Store Now !!

Detail Products

Detail Reviews

18-691, 1/2" Shank Dovetail Router Bit, 3/4" Cutter Diam., 3/4" Cutter Height, Cutter Angle 14°

18-691, 1/2" Shank Dovetail Router Bit, 3/4" Cutter Diam., 3/4" Cutter Height, Cutter Angle 14° Reviews

Other Picture

18-691, 1/2" Shank Dovetail Router Bit, 3/4" Cutter Diam., 3/4" Cutter Height, Cutter Angle 14° Feature

• 3/4" cutter diameter x 3/4" cutter height x 14° cutter angle
• Precision machined from fatigue-proof steel for extra strength
• Micro-grain carbide tips for a long life and repeated sharpening
• Silver PTFE coating reduces resin build-up for fast and easy cleaning
• Downshear geometry for clean cuts without fraying or torn edges

Rout eye-catching joinery that will last for generations! Well-fit dovetail joints are the mark of true craftsmen and they form a joint that will last for a lifetime and beyond. Use this fine carbide tipped dovetail bit to produce drawers, jewelry boxes, humidors, Shaker-style furniture and much more. Our bits are specially engineered to produce a burn-free cut and are accurate within +/- .005". Exactly what you need to make your project a success.

Visit Store Now !!

Detail Products

Detail Reviews

Freud 99-033 Wedge and Tongue Bit

Freud 99-033 Wedge and Tongue Bit Reviews

Other Picture

Freud 99-033 Wedge and Tongue Bit Feature

• 1-21/32-inch diameter, 1-3/32-inch radius, 1/2-inch shank
• Ground carbide with titanium for long life
• Anti-kickback
• Computer balanced for vibration free operation speeds over 22,000 RPM
• Impervious to chemical attack

Perfect for gluing together boards for wide projects such as table tops.Provide a strong joing, due to the increased glue area. Application: Cuts all composition materials, plywood, hardwood, and soft wood.Use on hand-held and table-mounted portable routers.

Visit Store Now !!

Detail Products

• Freud 99-032 Wedge and Tongue Bit

Detail Reviews

BOSCH 85516M 9 Degree Bevel Replacement Cutter 1/4-Inch Shank

BOSCH 85516M 9 Degree Bevel Replacement Cutter 1/4-Inch Shank Reviews

Other Picture

BOSCH 85516M 9 Degree Bevel Replacement Cutter 1/4-Inch Shank Feature

• Recommended for use with a routing table
• All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router

Bosch's router bits are distinguished for their careful selection of materials, exactly calculated cutting geometry, long bit life, extra sharp cutting edges and low vibrationRecommended for use with a routing tableAll bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router

Visit Store Now !!

Detail Products

Detail Reviews

Grizzly C1051 1/2" Rabbeting Bit, 1/2" Shank

Grizzly C1051 1/2" Rabbeting Bit, 1/2" Shank Reviews

Other Picture

Grizzly C1051 1/2" Rabbeting Bit, 1/2" Shank Feature

• Cutter Dia.: 1-1/4"
• Cutting Length: 1/2"
• Overall Length: 2-1/4"

Used for all types of rabbeting and slotting. Ideal for insetting glass, wood or plastic panels into frames. Great for making windows and picture frames. These are two-wing cutters. Use C1040 for "T" moulding and C1042 for No. "0" biscuit joining. Order G3855 replacement bearing for 3/8" cutting width. Use replacement bearing G3849 to decrease cutting width to 1/4".

Visit Store Now !!

Detail Products

Detail Reviews

61-507, 1/2" Shank Tongue & Groove Router Bit Set For Plywood Panel Door Construction

61-507, 1/2" Shank Tongue & Groove Router Bit Set For Plywood Panel Door Construction Reviews

Other Picture

61-507, 1/2" Shank Tongue & Groove Router Bit Set For Plywood Panel Door Construction Feature

• Both cutters feature an 1-3/4" cutter diameter
• Comes with one tongue cutter assembly and one groove cutter assembly
• Includes one 5.9mm slot cutter
• Will work with stock from 3/4" to 7/8" thick
• Produces both 5.5mm and 5.9mm grooves

Our adjustable Plywood Tongue & Groove Set allows you to make rattle-free tongue & groove profile doors using undersized plywood for the panel. The problem with regular tongue & grove cutters is that they cut a full 1/4" groove, too large for today's metric sized veneered plywood. The solution is our adjustable Plywood Tongue & Groove Set that cuts a 5.5mm or 5.9mm groove, perfectly fitting the two most common sizes of 1/4" veneered plywood. Finally, no more sloppy fitting plywood doors! The set comes with (1) 5.5mm kerf slot cutter, (1) 5.9mm kef slot cutter, (1) Arbor and bearing for groove cutter & (1) Tongue cutter assembly with arbor and bearing. All slot cutters feature our 3-wing anti-kickback design and will produce flawless cuts in the most demanding materials.

Visit Store Now !!

Detail Products

Detail Reviews

1/2" x 18 degree, 8mm Shank Dovetail Bit

1/2" x 18 degree, 8mm Shank Dovetail Bit Reviews

Other Picture

1/2" x 18 degree, 8mm Shank Dovetail Bit Feature

• 8mm shank
• 1/2" x 18 degree dovetail
• Carbide tip
• Requires 8mm reducer for 1/2" collet routers

1/2" x 18 degree, 8mm shank dovetail bit. These bits have 60 more metal than 1/4" shanks giving you greater stiffness for enhanced usability and increased feed rates in hardwoods. Requires 8mm reducer for 1/2" collet routers.

Visit Store Now !!

Detail Products

Detail Reviews

Rockler Tongue and Groove Router Bit, 1/2'' shank

Rockler Tongue and Groove Router Bit, 1/2'' shank Reviews

Other Picture

Make tongue and groove joints with a single bit! Bits cut a 1/4" high groove, and are pre-set to cut a corresponding 1/4" tongue. Bearing diameter is 22mm; cut depth is 3/8". A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life. Quality performance features include: K10 and K20 grade carbide for clean cutting action. Final sharpening with 600 - 800 grit diamond wheels. Precision balanced for smooth operation. Baked-on anti-stick coating to reduce pitch and resin buildup. Unconditionally guaranteed - if you are not 100% satisfied with these bits, send them back for a refund.

Visit Store Now !!

Detail Products

Detail Reviews