Peachtree 2 PC REPLACEMENT ROUTER BIT SET FOR STANDARD JIG PW3455

Peachtree 2 PC REPLACEMENT ROUTER BIT SET FOR STANDARD JIG PW3455 Reviews

Other Picture

Peachtree 2 PC REPLACEMENT ROUTER BIT SET FOR STANDARD JIG PW3455 Feature

• Use with Standard Dovetail Jigs
• 1/4" Shank 7 degree Dovetail Bit with 5/8" bearing
• 1/4" Shank 5/8" Straight Bit with 5/8" bearing
• The bits will cut dovetails in stock from 1/2" to 3/4" thick.

The bits will cut dovetails in stock from 1/2" to 3/4" thick. Use with 1½hp hand held router or on the top of a router table.

Visit Store Now !!

Detail Products

Detail Reviews

3374A -TONGUE SIDE ONLY- CARBIDE-TIP V PANEL TONGUE ROUTER BIT W/BB GU 1-3/4 DIA X 1" CL X 1/2 SH

3374A -TONGUE SIDE ONLY- CARBIDE-TIP V PANEL TONGUE ROUTER BIT W/BB GU 1-3/4 DIA X 1" CL X 1/2 SH Reviews

Other Picture

3374A -TONGUE SIDE ONLY- CARBIDE-TIP V PANEL TONGUE ROUTER BIT W/BB GU 1-3/4 DIA X 1" CL X 1/2 SH Feature

• AMERICAN MADE FOR THE AMERICAN WOODWORKER
• MADE FROM SOLID ALLOY STEEL
• PRECISION GROUND FOR PROPER BALANCE AT HIGH RPMS
• MADE WITH THICK CARBIDE FOR EXTRA SHARPENINGS
• USES THE HIGHEST QUALITY AMERICAN MADE MICROGRAIN CARBIDE

WHITESIDE MACHINE 3374A -TONGUE SIDE ONLY- CARBIDE-TIP V PANEL TONGUE ROUTER BIT W/BB GU 1-3/4 DIA X 1" CL X 1/2" SHANK X 2-3/4" OAL FOR 5/8" -1" MATERIAL

Visit Store Now !!

Detail Products

Detail Reviews

Freud 60-152 5/16-Inch Slotting Cutter Arbor with 1/2-Inch Shank

Freud 60-152 5/16-Inch Slotting Cutter Arbor with 1/2-Inch Shank Reviews

Other Picture

Freud 60-152 5/16-Inch Slotting Cutter Arbor with 1/2-Inch Shank Feature

• Kickback reducing design
• Individually computer balanced
• Precision ground for the smoothest cuts
• Covered by Freud's limited lifetime warranty

Produces smooth, precise, accurate slots. For premium performance, use with Freud slotting cutters. Compatible with any slotting cutter with a 5/16" arbor. 60-120 and 60-122 include bearing #62-108. Application: Cuts all composition materials, plywood, hardwood, and soft wood. Use on hand-held and table-mounted portable routers.

Visit Store Now !!

Detail Products

• Freud 60-102 5/16-Inch Slot Cutter Arbor with 1/2-Inch Shank

Detail Reviews

Grizzly C1068 3/8" 8° Dovetail Bit, 1/4" Shank

Grizzly C1068 3/8" 8° Dovetail Bit, 1/4" Shank Reviews

Other Picture

Grizzly C1068 3/8" 8° Dovetail Bit, 1/4" Shank Feature

• Angle: 8 degrees
• Cutter Dia.: 3/8"
• Cutting Length: 3/8"
• Overall Length: 1-3/4"

Used in the production of dovetail joints for drawers and fine furniture. Suitable for routing wood, laminates, plywood and composition paneling.

Visit Store Now !!

Detail Products

Detail Reviews

1/4'' BeadLOCK Tenon Router Bit

1/4'' BeadLOCK Tenon Router Bit Reviews

Other Picture

1/4'' BeadLOCK Tenon Router Bit Feature

• 1/2'' shank
• Approximately 3-1/2'' long
• Carbide length: about 1-3/4''
• Ultra-fine grade K20 tungsten carbide

Save money by making your own Beadlock loose tenon stock; just raid your scrap bin for material. Featuring precision-machined carbide flutes, this bit trims stock to 1/4" widths for a perfect match to your 1/4" Beadlock mortise. Its sturdy 1/2" shank ensures minimal vibration. You can stock up by running long lengths and cutting off tenons as needed, or you can just run a few short pieces for a small project. With Beadlock Router Bits, the choice is yours!

Beadlock router bits are manufactured using the finest grade K20 tungsten carbide, and are silver brass welded for the strongest possible bond. We use a 600 grit diamond sharpening wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. If for any reason you are not satisfied with the quality of the bit, return it with proof of purchase for a full refund or replacement.

Visit Store Now !!

Detail Products

• Rockler 1/4'' Accessory Kit for Beadlock Basic Jig

Detail Reviews

Rabbeting Router Bit Set (6 pc), 1/2" shank

Rabbeting Router Bit Set (6 pc), 1/2" shank Reviews

Other Picture

Rabbeting Router Bit Set (6 pc), 1/2" shank Feature

• Micrograin carbide tips
• 1/2" shank
• Includes 6 bearings
• Manufactured with tight quality control for highest quality
• Includes wooden storage box

This rabbeting set contains one rabbeting bit with 1/2" tall carbide cutter and a 1.5" diameter. Also includes 6 bearings to make 6 different depths of rabbets: 1/8", 1/4", 5/16", 3/8", 7/16", and 1/2". An impressive kit for the money. Also comes in a wooden stoarge box.

Visit Store Now !!

Detail Products

Detail Reviews

D14-50 CARBIDE-TIP 2 FLUTE DOVETAIL ROUTER BIT 14 DEGREE X 1/2 LG DIA X 1/2" CUT DEPTH X 1/4" SHANK

D14-50 CARBIDE-TIP 2 FLUTE DOVETAIL ROUTER BIT 14 DEGREE X 1/2 LG DIA X 1/2" CUT DEPTH X 1/4" SHANK Reviews

Other Picture

D14-50 CARBIDE-TIP 2 FLUTE DOVETAIL ROUTER BIT 14 DEGREE X 1/2 LG DIA X 1/2" CUT DEPTH X 1/4" SHANK Feature

• AMERICAN MADE FOR THE AMERICAN WOODWORKER
• MADE FROM SOLID ALLOY STEEL
• PRECISION GROUND FOR PROPER BALANCE AT HIGH RPMS
• MADE WITH THICK CARBIDE FOR EXTRA SHARPENINGS
• USES THE HIGHEST QUALITY AMERICAN MADE MICROGRAIN CARBIDE

WHITESIDE MACHINE D14-50 CARBIDE-TIP 2 FLUTE DOVETAIL ROUTER BIT 14 DEGREE X 1/2 LG DIA X 1/2" CUT DEPTH X 1/4" SHANK X 2" OAL- OMNIJIG 43705 AND INCRA

Visit Store Now !!

Detail Products

Detail Reviews