Grizzly C1077 1" 14° Dovetail Bit, 1/2" Shank Reviews
Grizzly C1077 1" 14° Dovetail Bit, 1/2" Shank Feature
- Angle: 14 degrees
- Cutter Dia.: 1"
- Cutting Length: 1-1/8"
- Overall Length: 2-3/4"
Thursday, June 30, 2011
Grizzly C1077 1" 14° Dovetail Bit, 1/2" Shank
Wednesday, June 29, 2011
KATANA Jointmaking Router Bit 3 Piece Set
KATANA Jointmaking Router Bit 3 Piece Set Reviews
KATANA Jointmaking Router Bit 3 Piece Set Feature
- Premium KATANA Quality Micro-grain Carbide, Precision Ground and Diamond-Honed
- Lifetime Guarantee
- Perfect for Making a variety of Strong Joints.
- Boxed 3 Bit Set: Reverse Glue Joint, Drawer Lock, and Lock Mitre Bits included.
- 1/2" Shank
Thursday, June 23, 2011
Dovetail Router Bit - 3/4'' Diameter x 7 Degree (1/2'' Shank)
Dovetail Router Bit - 3/4'' Diameter x 7 Degree (1/2'' Shank) Reviews
Dovetail Router Bit - 3/4'' Diameter x 7 Degree (1/2'' Shank) Feature
- K10 and K20 grade carbide for clean cutting action
- Final sharpening with 600 - 800 grit diamond wheels
- Precision balanced for smooth operation
- Baked-on anti-stick coating to reduce pitch and resin buildup
- 100% satisfaction guarantee!
Cut Diameter: 3/4"
Cut Height: 7/8"
Shank Diameter: 1/2"
Shank Length: 1-1/2"
Degrees: 7
Router Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions:
1) Rockler recommends using 1/2" shank router bits whenever possible. 1/2" shanks provide better stability with less vibration to produce a smoother cut and longer cutter life.
2) Make multiple light passes rather than one heavy cut.
3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back out 1/16" to 1/8".
4) Use a router table whenever possible.
5) When using large diameter bits, reduce the RPM of your router; then test your set-up on scrap lumber.
6) Always follow your router manufacturer's recommendations.
Tuesday, June 21, 2011
3/16'' 3 Wing Slotting Cutter
3/16'' 3 Wing Slotting Cutter Reviews
Slot cutters have a 22mm pilot bearing and cut a 1/2" deep slot. Slot height is equal to the cutter height listed above in the offer title.A fantastic value on high quality router bits, these bits are competitively priced while offering high performance and long life. Quality performance features include: * K10 and K20 grade carbide for clean cutting action. * Final sharpening with 600 - 800 grit diamond wheels.* Precision balanced for smooth operation. * Baked-on anti-stick coating to reduce pitch and resin buildup. * Unconditionally guaranteed.
Sunday, June 19, 2011
3373 CARBIDE-TIP STRAIGHT TONGUE/GROOVE 2 PC RB SET W/BB GU 1-1/4 DIA X 1-1/4"CL X 1/2" SHANK
3373 CARBIDE-TIP STRAIGHT TONGUE/GROOVE 2 PC RB SET W/BB GU 1-1/4 DIA X 1-1/4"CL X 1/2" SHANK Reviews
3373 CARBIDE-TIP STRAIGHT TONGUE/GROOVE 2 PC RB SET W/BB GU 1-1/4 DIA X 1-1/4"CL X 1/2" SHANK Feature
- AMERICAN MADE FOR THE AMERICAN WOODWORKER
- MADE FROM SOLID ALLOY STEEL
- PRECISION GROUND FOR PROPER BALANCE AT HIGH RPMS
- MADE WITH THICK CARBIDE FOR EXTRA SHARPENINGS
- USES THE HIGHEST QUALITY AMERICAN MADE MICROGRAIN CARBIDE
Saturday, June 18, 2011
Grizzly C1687 .002" Shim Set for C1682
Grizzly C1687 .002" Shim Set for C1682 Reviews
We probably have the largest selection of router bits and shaper cutters you'll find. For years, serious craftsmen have depended on the legendary Grizzly® Industrial Carbide Router and Shaper Cutters for precision milling and moulding applications. Grizzly® cutters feature top-quality carbide the best available for wood cutting applications. Shaped and sharpened with diamond wheels as fine as 600 grit, these outstanding shaper cutters and router bits are constructed with a high-tensile, silver-based brazing material, which offers the utmost in strength and durability. If you haven't tried these premium bits and cutters, we invite you to put them to the test. Same great bits and cutters that we've sold for years, however, we're in the process of changing to our new green color. Router bit sets have already been discounted and are not included in the special quantity discount. MANUFACTURED IN AN ISO 9002 APPROVED FACTORY! CHECK OUT THE SUPER-DUTY ROUTER BITS ON PAGES 363-368. THESE ARE THE BEST BITS MONEY CAN BUY!
18-131.8, 8mm Shank Dovetail Router Bit, 1/2" Cutter Diam., 5/8" Cutter Height, Cutter Angle 10°
18-131.8, 8mm Shank Dovetail Router Bit, 1/2" Cutter Diam., 5/8" Cutter Height, Cutter Angle 10° Reviews
18-131.8, 8mm Shank Dovetail Router Bit, 1/2" Cutter Diam., 5/8" Cutter Height, Cutter Angle 10° Feature
- 1/2" cutter diameter x 5/8" cutter height x 10° cutter angle
- Precision machined from fatigue-proof steel for extra strength
- Micro-grain carbide tips for a long life and repeated sharpening
- Silver PTFE coating reduces resin build-up for fast and easy cleaning
- Downshear geometry for clean cuts without fraying or torn edges
Thursday, June 16, 2011
Greenlee 625-7/8 Carbide-Tipped Hole Cutter, 7/8-Inch
Greenlee 625-7/8 Carbide-Tipped Hole Cutter, 7/8-Inch Reviews
Greenlee 625-7/8 Carbide-Tipped Hole Cutter, 7/8-Inch Feature
- Multiple tungsten carbide tips for long life and smooth cutting
- Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel
- Flange stop prevents over-drilling
- Replaceable cobalt steel pilot drill, with split-point tip design, to improve performance and resist walking
- Eliminates need for a center punch
Tuesday, June 14, 2011
3-piece PriceCutter Plywood Dado Sets - 1/4" Shank
3-piece PriceCutter Plywood Dado Sets - 1/4" Shank Reviews
3-piece PriceCutter Plywood Dado Sets - 1/4" Shank Feature
- No more frustration when cutting undersized plywood!
- Make tight dados easy with these special, undersized bits specifically designed for plywood.
- Includes 7/32", 31/64" & 23/32" carbide straight bits for 1/4", 1/2" & 3/4" plywood.
Monday, June 13, 2011
Greenlee 645-13/16 Quick Change Stainless Steel Hole Cutter, 13/16-Inch
Greenlee 645-13/16 Quick Change Stainless Steel Hole Cutter, 13/16-Inch Reviews
Greenlee 645-13/16 Quick Change Stainless Steel Hole Cutter, 13/16-Inch Feature
- Cuts stainless steel quickly and easily
- Quick change arbor allows you to change cutter heads with a simple push and a turn
- Use the same arbor for different size cutting heads
- Flange stop prevents over-drilling
- Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking
CMT 855.503.11 Lock Miter Router Bit 1/2-Inch Shank, 2-3/4-Inch Cutting Diameter, 1-1/4-Inch Cutting Length, 45 Degree Cutting Angle
CMT 855.503.11 Lock Miter Router Bit 1/2-Inch Shank, 2-3/4-Inch Cutting Diameter, 1-1/4-Inch Cutting Length, 45 Degree Cutting Angle Reviews
CMT 855.503.11 Lock Miter Router Bit 1/2-Inch Shank, 2-3/4-Inch Cutting Diameter, 1-1/4-Inch Cutting Length, 45 Degree Cutting Angle Feature
- Cut Diameter: 2 3/4"
- Cut Length: 1 1/4"
- Shank Diameter: 1/2"
Visit Store Now !!
Detail Products
Detail Reviews
Sunday, June 12, 2011
Amana Tool 53406 Slotting Cutter Assembly 1-7/8-Inch Diameter by 1/8-Inch Cutting Height by 3-Wing 1/4-Inch Shank, Carbide Tipped
Amana Tool 53406 Slotting Cutter Assembly 1-7/8-Inch Diameter by 1/8-Inch Cutting Height by 3-Wing 1/4-Inch Shank, Carbide Tipped Reviews
Amana Tool 53406 Slotting Cutter Assembly 1-7/8-Inch Diameter by 1/8-Inch Cutting Height by 3-Wing 1/4-Inch Shank, Carbide Tipped Feature
- 1-7/8-inch cutting diameter
- 1/8-inch cutting height
- 2-3/8-inch length
- 1/4-inch shank
- Carbide tipped, industrial quality
Saturday, June 11, 2011
KATANA Lock Mitre Bit for 7/16" to 11/16" Stock
KATANA Lock Mitre Bit for 7/16" to 11/16" Stock Reviews
KATANA Lock Mitre Bit for 7/16" to 11/16" Stock Feature
- Premium KATANA Quality Micro-grain Carbide, Precision Ground and Diamond-Honed
- Lifetime Guarantee*
- State-of-the-art router bit for top safety, durability, and performance.
- Make strong, perfectly-mated joints
- 1/2" Shank Bit
Subscribe to:
Posts (Atom)