#1 Morse Taper Arbor Adapter

#1 Morse Taper Arbor Adapter Reviews

Other Picture

Note: Morse Taper only. Mandrel Shaft sold separately.Perfect for use with the Pen Turning Mandrel system (Rockler #23552), which includes a #2 morse taper arbor for use with #2 morse taper lathe, a 7 mm mandrel shaft and knurled nut. #1 morse taper arbor adapter attaches to mandrel for use with #1 morse taper lathe. 10mm mandrel (Rockler #28652, sold separately) available for use with fountain and rollerball pen bushings.

Visit Store Now !!

Detail Products

Detail Reviews

Grizzly C1242 Tongue and Groove V-Match Set, 1/2" Shank

Grizzly C1242 Tongue and Groove V-Match Set, 1/2" Shank Reviews

Other Picture

Grizzly C1242 Tongue and Groove V-Match Set, 1/2" Shank Feature

• Cutter Dia.: 1-7/16"
• Cutting Length: 1"
• Overall Length: 2-1/2"

Used for making custom paneling and wainscoting. There's nothing like solid wood paneling to "spruce up" a room. For 5/8" to 3/4" material. Two-piece.

Visit Store Now !!

Detail Products

Detail Reviews

Rabbeting Bit Set

Rabbeting Bit Set Reviews

Other Picture

Rabbeting Bit Set Feature

• 6 different depth cuts using interchangeable bearings
• Use this bit to cut tongue and groove, ship lap joints and 1/2" slots
• The rabbeting bit set includes a rabbeting bit, hex key wrench and the necessary hardware for changing hardware.
• The shank on this bit is 1/2"
• The set comes inside a wooden storage box.

The 6 different interchangeable bearing allow you to make the following rabbet depths, each 1/2" in height: 1/8, 1/4, 5/16, 3/8, 7/16 and 1/2".

Visit Store Now !!

Detail Products

Detail Reviews

Rockler Tongue and Groove Router Bit, 1/4'' shank

Rockler Tongue and Groove Router Bit, 1/4'' shank Reviews

Other Picture

Rockler Tongue and Groove Router Bit, 1/4'' shank Feature

• K10 and K20 grade carbide for clean cutting action.
• Final sharpening with 600 - 800 grit diamond wheels.
• Precision balanced for smooth operation.
• Baked-on anti-stick coating to reduce pitch and resin buildup.
• Unconditionally guaranteed.

Make tongue and groove joints with a single bit! Bits cut a 1/4" high groove, and are pre-set to cut a corresponding 1/4" tongue. Bearing diameter is 22mm; cut depth is 3/8".

A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life.

Quality performance features include:

K10 and K20 grade carbide for clean cutting action.
Final sharpening with 600 - 800 grit diamond wheels.
Precision balanced for smooth operation.
Baked-on anti-stick coating to reduce pitch and resin buildup.

Unconditionally guaranteed - if you are not 100% satisfied with these bits, send them back for a refund.

Visit Store Now !!

Detail Products

Detail Reviews

Bosch 85527M 5/64" Kerf, 3 Wing Slotting Cutter with Carbide Tips (Super)

Bosch 85527M 5/64" Kerf, 3 Wing Slotting Cutter with Carbide Tips (Super) Reviews

Other Picture

Bosch 85527M 5/64" Kerf, 3 Wing Slotting Cutter with Carbide Tips (Super) Feature

• Bosch Router Bits - Distinguished for their careful selection of materials, exactly calculated cutting geometry, long bit life, extra sharp cutting edges and low vibration
• More than 500 items in solid carbide, carbide tipped and high speed steel varieties
• Working lengths of all Bosch router bits have been matched to the normal thickness of standard solid wood and wood materials.
• Long-lasting tungsten carbide cutting edges for use with tough materials

Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work.Bosch Router Bits - Distinguished for their careful selection of materials, exactly calculated cutting geometry, long bit life, extra sharp cutting edges and low vibrationMore than 500 items in solid carbide, carbide tipped and high speed steel varietiesWorking lengths of all Bosch router bits have been matched to the normal thickness of standard solid wood and wood materials.Long-lasting tungsten carbide cutting edges for use with tough materials

Visit Store Now !!

Detail Products

Detail Reviews

Freud 99-043 Lock Miter Router Bit 22-1/2° 1/2" Shank With TiCo Hi-Density Carbide

Freud 99-043 Lock Miter Router Bit 22-1/2° 1/2" Shank With TiCo Hi-Density Carbide Reviews

Other Picture

Freud 99-043 Lock Miter Router Bit 22-1/2° 1/2" Shank With TiCo Hi-Density Carbide Feature

• Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
• Cuts all composition material, plywood, hardwoods, and softwoods.
• Use on CNC and other automatic routers, as well as table-mounted portable routers
• Shear angle design produces superior finish
• Perma-shield coating to resist heat

Lock Miter Bit for creating interlocking corner joints

Visit Store Now !!

Detail Products

• Freud 99-034 2-3/4-Inch Lock Miter Bit
• Freud Inc 99-035 Baby Lock Miter Router Bit
• Freud 99-031 1-1/2-Inch Reversible Glue Joint Bit
• Freud 99-240 2-Inch Drawer Lock Bit
• MLCS 9167 Safety Push Block and Stick Package, 5-Piece

Detail Reviews

18-129, 1/4" Shank Dovetail Router Bit, 1/2" Cutter Diam., 13/16" Cutter Height, Cutter Angle 8°

18-129, 1/4" Shank Dovetail Router Bit, 1/2" Cutter Diam., 13/16" Cutter Height, Cutter Angle 8° Reviews

Other Picture

18-129, 1/4" Shank Dovetail Router Bit, 1/2" Cutter Diam., 13/16" Cutter Height, Cutter Angle 8° Feature

• 1/2" cutter diameter x 13/16" cutter height x 8° cutter angle
• Precision machined from fatigue-proof steel for extra strength
• Micro-grain carbide tips for a long life and repeated sharpening
• Silver PTFE coating reduces resin build-up for fast and easy cleaning
• Downshear geometry for clean cuts without fraying or torn edges

Rout eye-catching joinery that will last for generations! Well-fit dovetail joints are the mark of true craftsmen and they form a joint that will last for a lifetime and beyond. Use this fine carbide tipped dovetail bit to produce drawers, jewelry boxes, humidors, Shaker-style furniture and much more. Our bits are specially engineered to produce a burn-free cut and are accurate within +/- .005". Exactly what you need to make your project a success.

Visit Store Now !!

Detail Products

Detail Reviews

Grizzly C1712Z Super-Duty Corner Lock Miter Bit, 1/2" Shank

Grizzly C1712Z Super-Duty Corner Lock Miter Bit, 1/2" Shank Reviews

Other Picture

Grizzly C1712Z Super-Duty Corner Lock Miter Bit, 1/2" Shank Feature

• Cutter Dia.: 1-5/8"
• Cutting Length: 11/16"
• Overall Length: 2-1/4"

Used for making 90 DEG corner joints in wood for 1/2" to 9/16" material. Instructions for use provided. Sometimes you want the best money can buy; sometimes your project requires you to use the best router bits made. If so, this router bit fits the bill! Starting with a better quality steel for the bodies (SAE4140), we heat treat it to the appropriate hardness and apply K10 micro grain carbide. We then precision grind the blades to 800 grit (using the wet grinding process) so that it is razor sharp and then finish it with a baked-on metallic paint. This router bit is made for us and to our exacting specifications in an ISO 9002 rated factory. The purple color used on our Super-Duty Router Bits is a registered trademark and is owned by Grizzly Industrial. GREAT FOR JEWELRY BOXES & DRAWERS! Dimensions: Cutter Dia.: 1-5/8" * Cutting Length: 11/16" * Overall Length: 2-1/4"

Visit Store Now !!

Detail Products

Detail Reviews

Grizzly C1792 Dovetail - Carbide 1/8" Shank

Grizzly C1792 Dovetail - Carbide 1/8" Shank Reviews

Other Picture

Grizzly C1792 Dovetail - Carbide 1/8" Shank Feature

• Angle A: 7 Degrees
• Cutter Dia. A: 1/4"
• Cutter Dia. B: 5/16"
• Cutter Dia. C: 1-3/8"

Used in the production of dovetail joints for drawers and fine furniture. Suitable for routing wood, laminates, plywood and composition paneling. Cutter Dia. A: 1/4" Cutter Dia. B: 5/16" Cutter Dia. C: 1-3/8" Angle A: 7 Degrees

Visit Store Now !!

Detail Products

Detail Reviews

Yonico # 15225 - Edge Banding Router Bit Set - V-Design Tongue and Groove

Yonico # 15225 - Edge Banding Router Bit Set - V-Design Tongue and Groove Reviews

Other Picture

Yonico # 15225 - Edge Banding Router Bit Set - V-Design Tongue and Groove Feature

• Premium quality carbide cutters
• 1/2" shank, solid wood storage case
• Precision CNC balanced for smooth cuts
• Tongue & Groove - 1" cutter height, 1/2" cutter depth, 1-1/2" diameter, 2-1/2" overall height

Add a solid wood edge to the ends of your plywood or MDF shelving for a neat, finished look. This set can also be used in the place of conventional tongue & groove joints where a perfect fit is necessary. The 90° design provides for easy and precise set up. Bits are industrial quality carbide tipped and 2 flute. Use with up to 1" stock. Set comes in a solid wood storage case. Shanks are 1/2".

Visit Store Now !!

Detail Products

• Yonico # 15223 - Matched Tongue and Groove Router Bit Set- Edge Banding
• BOSCH RA1181 Benchtop Router Table

Detail Reviews

Grizzly C1665Z Super Duty Carbide Tipped Tongue & Groove Kit 1/2" Shank

Grizzly C1665Z Super Duty Carbide Tipped Tongue & Groove Kit 1/2" Shank Reviews

Other Picture

Grizzly C1665Z Super Duty Carbide Tipped Tongue & Groove Kit 1/2" Shank Feature

• Cutter Dia. (A): 1-3/4"
• Cutting Depth (D): 7/16"
• Cutting Length (B): 3/4"
• Overall Length (C): 3"

Sometimes you want the best money can buy; sometimes your project requires you to use the best router bits made. If so, this router bit fits the bill! Starting with a better quality steel for the bodies (SAE4140), we heat treat it to the appropriate hardness and apply K10 micro grain carbide. We then precision grind the blades to 800 grit (using the wet grinding process) so that it is razor sharp and then finish it with a baked-on metallic paint. This router bit is made for us and to our exacting specifications in an ISO 9002 rated factory. The purple color used on our Super-Duty Router Bits is a registered trademark and is owned by Grizzly Industrial. Kit includes: Arbor, 2 cutters, 2 bearings and shim set.

Visit Store Now !!

Detail Products

Detail Reviews

Freud 99-036 Adjustable Tongue and Groove Bit Set, 1/2-Inch Shank

Freud 99-036 Adjustable Tongue and Groove Bit Set, 1/2-Inch Shank Reviews

Other Picture

Freud 99-036 Adjustable Tongue and Groove Bit Set, 1/2-Inch Shank Feature

• Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
• Adjustable at .002-Inch increments for stock thickness of 1/2-Inch to 1-1/4-Inch and groove widths of 7/32-Inch to 3/8-Inch
• Freud's exclusive design features a tongue cutter with opposing shear angles to ensure a flawless finish
• Perfect for producing Shaker style cabinet doors
• Cuts all composition material, plywood, hardwoods and softwoods.

The Freud Difference
Freud manufactures some of the most innovative, technologically advanced saw blades in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo -- a combination of titanium and cobalt. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. By overseeing the entire manufacturing process from start to finish, Freud guarantees some of the highest quality, most advanced products in the industry.

About Freud's Industrial Bits
Serious woodworkers choose serious accessories. They choose Freud. The Freud name equals quality, precision and craftsmanship. Freud router bits feature TiCo Hi-Density Carbide for maximum cutting life and are individually balanced; providing a cut above the rest. When you’re looking for a serious router bit, look for Freud red.

About this Adjustable Tongue and Groove Bit Set
Freud's adjustable tongue and groove bit set is ideal for producing perfectly fitted tongue and groove joints. Freud's exclusive design features a tongue cutter with opposing shear angles to ensure a flawless finish. These bits are adjustable at .002-inch increments for stock thickness of 1/2 to 1-1/4-inch, and groove widths of 7/32 to 3/8-inch. The tongue bit diameter is 1-3/4-inch, 7/32-3/8-inch carbide height, 1/2-inch shank, 3-1/4 inches overall. Groove bit diameter 1-3/4-inch, 13/16-inch 1-11/32-inch carbide height, 1/2-inch shank, 2-11/16 inches overall.

Applications
Use this set to produce perfectly fitted tongue and groove joints for projects such as Shaker style cabinet doors. These bits cut all composition materials, plywoods, hardwoods, and softwoods. They are designed for use with table-mounted portable routers.

Warranty
These bits are covered by Freud's limited lifetime warranty. An industry leader for over 50 years, the Freud name equals quality, precision and craftsmanship. Freud router bits feature Freud made TiCo Hi-Density Carbide for maximum cutting life. Each bit is individually balanced, giving a cut above the rest. Trim carpenters, remodelers, and woodworking enthusiasts can now mill molding of almost any size, shape and configuration to add beautiful detail to match existing trim or create an all new look. All thats required is a 2-1/4 HP or larger router, a sturdy router table and fence, and a selection of bits from Freuds Architectural Molding Series. The adjustable tongue and groove bit set produces perfectly fitted tongue and groove joints for projects such as shaker style cabinet doors. Exclusive Freud design features a tongue cutter with opposing shear angles to ensure a flawless finish for stock thickness of 1/2" to 1-1/4". Groove cutter adjusts at .002" increments for groove widths of 7/32" to 3/8".

Visit Store Now !!

Detail Products

• Kreg PRS3020 True-FLEX Featherboard - Twin Pack
• BOSCH RA1181 Benchtop Router Table
• Kreg PRS3400 Precision Router Table Set Up Bars, Set of 7
• MLCS 8377 Router Bit Set with Carbide-Tipped 1/2-Inch Shank, 15-Piece
• Bosch 1617EVSPK 12 Amp 2-1/4-Horsepower Plunge and Fixed Base Variable Speed Router Kit with 1/4-Inch and 1/2-Inch Collets

Detail Reviews

Grizzly C1097 Slotting Bit, 1/4" Shank, 1/8" Cutting Length

Grizzly C1097 Slotting Bit, 1/4" Shank, 1/8" Cutting Length Reviews

Other Picture

Grizzly C1097 Slotting Bit, 1/4" Shank, 1/8" Cutting Length Feature

• Cutter Dia.: 2"
• Cutting Depth: 9/16"
• Cutting Length: 1/8"
• Overall Length: 2-1/4"

These bits are ideal for grooving, rabbeting and slotting. Use C1098 or C1102 for No. "10" or "20" biscuit joining. They come complete and ready to use. Please check cutting diameter when comparing bits!

Visit Store Now !!

Detail Products

Detail Reviews